Quick start · 6 steps · about a minute
From a STEP file to the simulation — step by step.
Watch the video, or read the steps beside it. Each step is in step with the video — tap one to jump there — and each one ends with the button to do it yourself.
Recorded from the real app · build 439
No sound — every step is written here
No YouTube, no tracking
The video is recorded again from the app whenever its screens change — it does not show an old screen.Space = play / pause on the video
The steps
-
Two files: the model (STEP) and its drawing (PDF).
Nothing is uploaded: the model is read in your browser.- The drawing decides — the material, the tolerances and the threads are read from it.
- Have a part of your own? Use its STEP and drawing instead.
-
“Sign in” at the top of the site.
- With an account: your email and password.
- Just looking? “Try it without an account” — everything stays in this browser.
-
Drag the STEP and the PDF onto “MEKLYRA plans it”.
- No files at hand? Tap the sample MEK-DEMO-07 under the drop area.
- The machine is picked once; the material comes from the drawing.
-
In under a minute: setups, tools, speeds and times.
- A line marked in amber is something to enter or to source — tap it, and it says exactly what.
- Every setup opens to its operations and says why it is there.
-
“Watch it being machined” under the model.
- The tool cuts the stock operation by operation.
- At the end: what is left standing, and whether anything touched the part.
-
“Job package” at the top: what the operator needs at the machine.
- Tools, setups and the inspection sheet — printed, or on the tablet at the machine.
- Sign it off and release it to the floor.
With your own part
The same six steps — the STEP and a PDF or DXF drawing. The model never leaves your computer.
How it decides
Every setup, tool and speed cites the rule it came from. How it works.
See it on your part
Send us one part and we run it with you. Book a demo.